| > Home > Expert advice > Staining and painting | > Print this page |
Staining and painting
The final step to installing mouldings, it’s the finish sets the tone. These videos will show you how to achieve the result you’re looking for.
› Do you have a modem cable ? | The video may take a few seconds to begin. |
Staining
Apply stain before installing the moulding.
Perform a color test on a hidden spot before staining the entire piece.
Use pencils designed for hiding nail holes and cuts.
Varnish.
Painting
Before painting, remove all traces of dust from sanding.
Normally, mouldings require three coats of paint. Two coats may be sufficient for primed mouldings.
Never paint mouldings with a roller brush.
It’s important to let the paint dry completely before applying another coat.
Sand the moulding with 220 or 240 grade paper between coats.
Apply stain before installing the moulding.
Perform a color test on a hidden spot before staining the entire piece.
Use pencils designed for hiding nail holes and cuts.
Varnish.
Painting
Before painting, remove all traces of dust from sanding.
Normally, mouldings require three coats of paint. Two coats may be sufficient for primed mouldings.
Never paint mouldings with a roller brush.
It’s important to let the paint dry completely before applying another coat.
Sand the moulding with 220 or 240 grade paper between coats.
